February 2000
Load Meter - Battery powered load cell indicator.

The SY021 Load Meter offers:-

• Portable for on-site testing
• Measurements in remote locations
• Testing of load cells in situ
• Stores last calibration with
  Easy re-calibration in mV/V
• Two sensitivity ranges
  Low - 0-2.25mV/V
  High - 2.25-4.5mV/V

This instrument provides a truly portable solution for use at any location regardless of local power supplies. The easy operation means that the previous calibration is stored for instant use at switch-on and if a new calibration is necessary this is simply keyed in using the membrane numeric keypad to enter new values for mV/V and full-scale capacity.

The unit contains all the signal conditioning to work with any sensitivity load cell or other strain gauged sensor and is powered by a single PP3 battery. A regular Alkaline cell will offer many hours of operation before replacement or alternatively a rechargeable NiCd or NiMH battery can be fitted.

A data sheet with full electrical and mechanical specifications will be available on this website in the near future but in the interval please contact our Sales Department for further information. Now available loadmeter1.pdf