| as600.pdf |
 |
Model AS600 Load cell Simulator / Indicator Calibrator
Simulates load cell for fault finding
Calibrate or check digital indicators
Optional UKAS calibration
0.01% Accuracy
Compact size
Switched output Positive/Zero/Negative
11 switched steps
5 impedance ranges |
| n/a |
 |
Model SY009 in-cell Load cell amplifier
In-cell load cell signal conditioning amplifier
Small size Ø19mm
Output in +/- 10V range
Bipolar supply (Single supply version available)
Drives bridges of >250 ohms
|
| n/a |
 |
Model SY011 Load cell amplifier
High accuracy signal conditioning amplifier
Voltage, Current or Frequency Output versions
Small physical size
Excitation for up to 4x 350 ohm bridges
User adjustable zero & span trimmers
Single DC supply
|
| n/a |
 |
Model SY014 in-cell Load cell amplifier
In-cell load cell signal conditioning amplifier
Current Output
Small size Ø25mm
On-board non-interactive zero & span trimmers
Single 10-30 Vdc supply
-2W Version, 2 wire connection for 1500+ ohm bridges
-3W Version, 3 wire connection for other bridges
|
| sy016.pdf |
 |
Model SY016 Digital load cell amplifier
High accuracy digital signal conditioning amplifier
Internal ADC resolution 1,048,576 counts @400 readings/s max
RS485 Data format (RS232 optional) @ 115K2, 19K2, 9600 or 2400
Bridge excitation 8V dc for up to 4x 350 ohm bridges
Small size PCB 40x55mm (Optional cased version)
|
| sy018.pdf |
 |
Model SY018 DIN load cell amplifier
High stability DIN signal conditioning amplifier
Voltage or Current Output versions
Compact DIN rail mount package
Factory set sensitivity from <1 to >4mV/V
Easy setup with non-interactive zero & span trimmers
Excitation for up to 4x 350 ohm bridges
Nominal 24 Vdc (17-30)supply
|
